It’s obvious that there’s 1760 yards in a mile.
There’s 22 yards in a chain, which we can all remember because of the 22 yard line in rugby.
There are 10 chains in a furlong, which fans of metric can’t complain about.
There are 8 furlongs in a mile, just like there are 8 pints in a gallon.
And 22x10x8 = 11x10x16 and 11 is easy to multiply by in your head, so it’s really very simple to get to 1760.
/s
this but unironically.
Uh, no.
10 feet = 1 decafoot
100 centiyards = 1 yard
1x10^18 attoacres = 1 acre
I’m gonna start estimating distances in millimiles.
333.3 yards = 1 kilofeeter
This guy gets it
one thing i enjoy way more than i should is use units that are technically correct, but no one uses them like ever.
like megagrams instead of metric tonnes.
or 1 dekameter instead of 10 meters.
I measure battery capacity and electricity consumption in J/kJ/MJ, as intended. None of that kWh bullshit.
It also makes for fun comparison with energy value of foods.
Energy is energy, after all.
Relevant Technology Connections
im a fan of giving energy in: kg • m² ÷ s²
What, you still multiply by an arbitrary constant? I remember back before I switched to: kg • c²
I only use metric when it’s in forms nobody else uses or recognizes at a glance because I need to be difficult. Decimeter is perfect for like, height of a person, for example. Why do they use CM?
decimeters is perfectly fine. basically all volume calculations boil down to dm³ as 1 dm³ = 1L
Sir, this is a Wendy’s, we measure in common units around here…
shopping for a new mailbox today, they used number of baseballs it can fit as the units and/or basketball for the big ones
Yeah, after learning Japanese in 3 different writing systems, one of which has thousands of characters… I’m never hearing criticism of Imperial units again
If you consider hiragana and katakana to be different writing systems, then English lower and upper case letters are two different writing systems, too.
Not that it makes Kanji any easier to learn.
Sorry, I haven’t gotten to the katakana part yet. Are you saying they’re all the same sounds as hiragana, just slightly different shapes?
あ and ア are pronounced the same. Katakana is used for foreign words mainly if I’m not mistaken.
Pretty much, yeah.
1 acre
UK 4,046.85642 m²
US 4,046.87261 m²
1 acre (us international acre)= 0.999996 acres(us survey acres).
Even inside the US they use two different measures for acre.
Is that because of the survey foot?

It’s easier to use their names
Deci = 1/10th
Centi = 100th
Milli = 1000th
Micro = 1,000,000th
Nano = 1,000,000,000thDeca = ×10
Hector = ×100
Kilo = ×1,000
Mega - ×1,000,000
Giga = × 1,000,000,000
Tera = × 1,000,000,000,000,000Etc prefixing the thing being measured.
So you know what a centimetre, gigabyte, megaton, kiljoule, etc. are.
Other easy conversions too, like 1kg = 1L of water.
And it’s metre. Because a meter is a measuring device and all this shit is Latin (metrum) like proper science stuff be. Americans don’t even use it, so they can fuck off with their misspelling.
And that’s it. You now know the metric system. You probably now realise you’ve been using it all along for many things.
You’ve been hit by…
You’ve been struck by…
A smooth metric system
Annie, are you Oakley? Are you Oakley, Annie?
We all know it’s a much better system. Reagan killed our attempt at switching. No one has tried since.
Personally, I use metric for 3D printing, and I use imperial for wood working. Until standardized material sizes change, it doesn’t make sense to use metric for wood working. That change needs to come from the top, from government regulation.
I remember discussing with a huge group of European students what imperial had become mainly used for in UK and Ireland. It’s for height and pizza size. I was in a group with many girls so us guys stopped short of mentioning about dick size being one of the few things imperial is only used for in UK and Ireland.
Wait till you hear about the energy efficiency ratio
is that the one where they measure one half in BTUs and the other in KWh for some reason
Cooling potential in BTUs compared to electrical power input in watts. Similar to coefficient of performance, but that one isn’t a bastard. I still blame the British for BTUs though
One big cube for ice in my study room for me please.
Americans choose to meassure thier dicks with the thumb of a british king instead of using meters… or GIGAmeters… there are no correct awnsers, right?
0.0000000003448 GIGAmeters just doesn’t sound that impressive…
3,5 10-10 Gm
Also, notice that ypu can round it up a bit…
And, who meassures his dick… you just need an honest aproximation.
Exemple: “my dick? You mean from the root? I think it’s just a fraction of a gigameter…” which is a 100% honest and humble response.
Edit: one can also use astronomic units… 1 AU =~ 150 Gm
Meanwhile the UK naming their currency after a sex act.
I fucking love the Key and Peele (or was it SNL?) founding fathers skit about this. 😆
Fathers on SNL, my favorite







